Lumina Blaze Pro P4 Outdoor

The Lumina Blaze Pro P4 (model LDSODP4PRO) is our premium 4mm outdoor module for high-visibility advertising, building façades, stadiums and live-event screens that will be filmed or broadcast. It pushes brightness to 5500–6000 cd/m² for strong readability in full sun, and refreshes at 7680Hz so the image stays clean on camera. It also draws less power than the standard Blaze P4: 750 W/m² max against 879 W/m². The rear driver PCB is fully sealed with silicone potting, so only the HUB75 signal ports and the power connector are exposed, protecting the electronics against rain, dust and humidity in the field. It keeps the standard 320 x 160mm, 80 x 40-pixel format, so it shares cabinets with the Blaze P4.

• Model: LDSODP4PRO | Pixel Pitch: 4mm | Pixel Density: 62,500 dots/m²

• Configuration: 1R1G1B | LED Type: SMD1921

• Module Size: 320 x 160 x 17.5mm | Module Weight: 0.49kg ± 0.02kg

• Resolution: 80 x 40 (3,200 dots)

• Interface: HUB75 | Single-dot Brightness Calibration: Supported

• Driver IC: ICND1065L (driver) + HX6016SP (row decoder)

• Rear Protection: Silicone-potted driver PCB; only HUB75 and power ports exposed

• Brightness: 5500–6000 cd/m² | Brightness / Colour Uniformity: ≥98%

• Viewing Angle: 140°(H) / 140°(V) | Contrast Ratio: 5000:1

• Colour Temperature: 6500–25000K, adjustable

• Refresh Frequency: 7680Hz | Frame Frequency: 60Hz

• Processing Depth: 12–14 bit | Video Support: 2K HD, 4K UHD

• Power Consumption: 750 W/m² max | 250 W/m² typical

• Per Module (calculated): ≈38W max | ≈13W typical

• Power Supply Input: AC 90–132V / AC 186–264V, 47–63Hz

• Operating: -20°C to 50°C | 10%–80% RH (no condensation)

• Storage: -20°C to 55°C | 10%–85% RH (no condensation)

• Lifespan: 100,000 hours

• Modules per Cabinet: 18 (3 x 6) | Cabinet Pixels: 240 x 240 (57,600 dots)

• Cabinet Area: 0.9216m² | Cabinet Max Power: ≈691W | Typical: ≈230W

• Also fits outdoor MS (GI) and die-cast cabinets in any multiple of 320 x 160mm

• Standard mounting screws are M4 x 8mm for MS (GI) cabinets; specify M4 x 10mm screws when ordering for die-cast cabinets

• Do not cut or peel the silicone potting; it is the module's weather seal

• Set up the receiving card for 7680Hz output to get the camera-friendly performance

• Compatible with Colorlight, Huidu and NovaStar receiving cards (HUB75)

• Brand: Lumina Display Systems