P4 Outdoor LED Modules
( 8 Products Available )320 × 160 mm · 80 × 40 px · ex-stock Mumbai · pan-India delivery
| Module | Refresh | Price |
|---|---|---|
| FeuVision IFS-LOA4S-C | 3840 Hz | ₹1,250 |
| Qiangli Q4 MPro | 3840 Hz | ₹1,300 |
| Lumina Blaze | 3840 Hz | ₹1,350 |
| FeuVision IFS-LOA4S-CPRO | 7680 Hz | ₹1,350 |
| Qiangli Q4 Pro | 7680 Hz | ₹1,450 |
| Qiangli Q4 Pro corner (90°) | 7680 Hz | ₹1,500 |
| Lumina Blaze Pro (sealed rear) | 7680 Hz | ₹1,700 |
| Qiangli Q4 Pro half module (80 × 160 mm) | 7680 Hz | ₹850 |
Price per module, GST extra. Trade accounts see their own rate after signing in. Bulk rate: WhatsApp +91 86575 47919.
Full specs and comparison
P4 outdoor LED modules for hoardings, building facades, stadiums and outdoor event screens: the most popular outdoor pitch in India. Every module here is 320 × 160 mm with 80 × 40 pixels, so they share cabinets, controllers and cable sets. Outdoor modules are sealed at the front (IP65), bolted into outdoor cabinets and serviced from the back. GST invoices and batch-matched spares.
| Module | Brightness | Max power |
|---|---|---|
| Lumina Blaze | 5000 nits min | about 45 W* |
| Lumina Blaze Pro | 5500–6000 nits | about 38 W* |
| Qiangli Q4 MPro | 4500–5000 nits | 47 W |
| Qiangli Q4 Pro | 5000–5500 nits | 47 W |
| Q4 Pro corner | 5000–5500 nits | see product |
| Q4 Pro half module | 5000–5500 nits | 11.75 W |
| FeuVision LOA4S-C | 4500–5000 nits | 40 W |
| FeuVision LOA4S-CPRO | 5000–5500 nits | see product |
*Calculated from the datasheet maximum of 879 W/m² (Blaze) and 750 W/m² (Blaze Pro). All are 1/10 scan except where the product page says otherwise. Blaze Pro has a silicone-potted rear: the driver board is sealed and only the HUB75 signal ports and power connector are exposed, for monsoon and coastal sites.
Is P4 the right pitch?
- Closest viewing: about 4 m. Nearer than that, the pixel grid becomes visible.
- Comfortable viewing: about 6.9 m and beyond.
- Closer than 4 m:P3 or P2.5 outdoor.
- Highway hoardings seen from 15 m or more:P6 / P6.67 covers more area for the same budget.
The full method is in our pixel pitch guide.
Planning the wall
| Pixels per module | 80 × 40 (3,200) |
| Pixels per m² | 62,500 |
| Modules per m² | about 19.5 |
| 960 × 960 mm cabinet | 18 modules, 240 × 240 px, one receiving card, typically 3 × 60 A supplies |
| 1280 × 960 mm cabinet | 24 modules, 320 × 240 px, typically 4 × 60 A supplies |
| Native Full HD wall | 7.68 × 4.32 m |
- Cabinets: outdoor GI cabinets (960 × 960 and 1280 × 960 mm) or outdoor die-cast cabinets. Die-cast is lighter and more accurate; GI costs less per cabinet but is heavier. See our GI vs die-cast guide.
- Power: 60 A supplies, counted per cabinet. Qiangli runs on 4.5 V, FeuVision on 4.2–5.0 V, Lumina Blaze on 4.5 V or 5 V; one voltage per wall. For generator-backed sites, consider active-PFC supplies. See the power supply guide.
- Control: one receiving card per cabinet, on Colorlight receiving cards and controllers. For a 7680 Hz module, set the receiving card for 7680 Hz output.
Frequently asked questions
Which P4 module is brightest? Lumina Blaze Pro, at 5500–6000 nits. Every 7680 Hz module here is rated 5000 nits or more.
3840 Hz or 7680 Hz? Both look the same to the eye. On camera, a 3840 Hz screen can show rolling lines; a 7680 Hz screen does not. Choose 7680 Hz if the screen will be filmed or broadcast.
Can I mix brands or batches on one wall? No. Colour and brightness differ between brands and production batches. Order the whole wall, plus spares, from one batch.
Do you supply complete screens? Lumina supplies components to system integrators and screen builders. Integrators can price a full bill of materials in our Screen Builder.
Need help choosing? Send the wall size, viewing distance and use, and we will suggest the module, cabinet and controller. WhatsApp +91 86575 47919.







